Faciens Technologies · theoretical explorer

The Möbius Atlas

In my geometry an orientation is never just a direction. Orientational Connective Logic treats it as a direction together with its path, its order, its spread and its context, and the same geometry is what Quester GX-1 is built on. This page shows that structure working, using polarised light as the testbed because every claim can be checked on it: the history an orientation carries, the record its path leaves, the tensor that holds what a mean direction loses, Quester’s sixteen characters, and the structure OCL proposes beyond direction. Each layer is labelled for what it is.

Checked on lightPrediction from the geometryProposed by OCL
Checked on light

Can you detect what you cannot see?

Two beams of light leave the same source. One goes straight to you. The other is sent around a loop of polarisers and comes back. Every instrument that looks at either beam on its own gives the same reading.

Beam A (straight)Beam B (around the loop)
Polarisationhorizontalhorizontal
Stokes vector(1, 0, 0)(1, 0, 0)
Degree of polarisation100%100%

Question 1. Are these two beams physically different?

The loop beam B travels on the polarisation sphere, starting and ending at horizontal, H (the large dot).

Geometry or intuition? Five questions

Experiment of the day

Everyone gets the same loop today. How large a phase will the light pick up? Enter your guess in degrees.

Checked on light

Orientation on the sphere

In OCL every orientation has a place on a sphere of directions. For light this is the Poincaré sphere: horizontal and vertical at opposite ends of one axis, the two diagonals on another, the two circular states at the poles. Waveplates and rotators turn the point around the sphere. Build a chain and watch the light’s orientation move.

Optical elements, in the order the light meets them
Turn the view
path in your ordersame elements, reversed

Jones calculus. A waveplate with retardance δ and fast axis at θ is Rot(−θ)·diag(1, eiδ)·Rot(θ); half-wave δ = π, quarter-wave δ = π/2. Stokes convention: S₃ = +1 is right circular. Ideal, lossless elements.

Checked on light Prediction from the geometry

The history it carries

In my geometry, order is part of an orientation: changes of orientation do not commute, so the same elements in a different order leave a different result. The order of what happened is written into the orientation, and OGD-NC1 predicts it can be read back. Here every possible order of your chain is tried.

OrderS₁S₂S₃Same final light as your order?

The light that comes out records only part of the history: two different orders can leave one input in the same state. Sending three probe states through the chain (H, D and R) recovers the whole transformation, so every order that acts differently on light can be told apart. That is standard process tomography. The prediction of my OGD-NC1 programme is that the ordered history of such non-commuting transformations stays recoverable from final measurements under realistic noise and disorder; it is at the stage of a testable computational prediction, not a measured result.

Prediction from the geometry

Does the history survive real optics?

Real waveplates have retardance errors, their axes are set slightly off, and every measurement counts a finite number of photons. Here the order of your chain is chosen at random, the light passes through imperfect elements, the three probes are measured with photon noise, and the most likely order is read back. This is the robustness question at the heart of OGD-NC1.

Model: each element’s retardance is scaled by (1 + error) and its axis shifted by the axis error, drawn independently for every trial; each Stokes component is read with binomial-like noise √((1 − s²)/N). The order is recovered by least squares against the ideal predictions for all three probes. Orders that act identically on light count as one. Seeded, so a run can be repeated exactly.

Checked on light

The path record

Take light around a closed loop on the sphere, here by passing it through a series of polarisers, and it comes back to the orientation it started with. Yet it has changed: it now carries a phase equal to half the solid angle its path enclosed. Nothing about the returned light alone reveals it. Only interference with light that stayed behind does. This is the path record OCL builds on: an orientation remembering the shape of its journey. (In optics the same effect is called the Pancharatnam–Berry phase.)

Corners of the loop (latitude, longitude on the sphere)
Turn the view

Computed two independent ways: as the argument of the Bargmann invariant ⟨ψ₁|ψ₂⟩⟨ψ₂|ψ₃⟩…⟨ψₙ|ψ₁⟩ of the states at the corners, and as half the signed solid angle of the geodesic polygon on the sphere. They agree. Light lost at the polarisers is the squared size of the same invariant. Top fringes: reference; bottom: after the loop, shifted by the phase.

Checked on light Proposed by OCL

The orientation tensor

My geometry describes a population of orientations by two objects: the mean orientation, and the orientation tensor of amendment A-3.1, which records how the parts are spread. The tensor is the object that predicts Quester design cost better than the mean direction. On light, the mean orientation is the Stokes vector; two mixtures with the same mean read identically on every instrument, yet their tensors can differ. The tensor holds what the light alone does not.

Mixture
Orientation tensor (average of s·sᵀ over the parts)

The coherence matrix of the light is ρ = ½(I + S·σ); it depends only on the Stokes vector S, so mixtures with equal S read identically on every measurement of the light. The orientation tensor lives in how the mixture was prepared. Whether a process can respond to it without contradicting that identity is the open question this section poses.

Checked exactly

Quester’s sixteen characters

Quester’s sixteen characters live one level up. The geometry of an orientation extends to a sphere in four dimensions, and each point of the polarisation sphere is a whole circle there: the circle of the light’s overall phase. This is the Hopf fibration. Drawn in three dimensions, the circles above any loop on the polarisation sphere weave into a torus, and every two of them link exactly once.

Turn

Quester’s sixteen characters, seen from above

The sixteen workload characters of Quester GX-1 are orientations on this same four-dimensional sphere: each is (±½, ±½, ±½, ±½). Read as a light state and sent down the Hopf map, they land on just four points of the polarisation sphere, D, A, R and L, four characters to each. The map forgets one rotation’s worth of information, and characters that differ only along a fibre become indistinguishable.

Lands onCharacters

A character (a, b, c, d) is read as the light state (a + ib, c + id); its image is (|z₁|² − |z₂|², 2 Re z̄₁z₂, 2 Im z̄₁z₂). Fibres are drawn by stereographic projection from the four-sphere’s north pole.

Proposed by OCL

Orientational Connective Logic

A polarimeter reports a direction on the sphere and nothing more. In Orientational Connective Logic an orientation is part of a richer object: alongside its direction it has a context, a ground set (the directions it can support) and a load. Two beams can read identically on every instrument and still stand in different relations. The theoretical question this page poses is whether physical orientations carry such structure that our instruments do not yet read.

Two orientations

Beam aBeam b
ab and the cap of directions it supportsedge of the hemisphere opposed to a

What each description sees

Where OCL meets light

Some of the logic’s quantities already have physical counterparts. The mean orientation of a set is the Stokes vector of partially polarised light, and its length is the degree of polarisation. The second-moment orientation tensor plays the role of the coherence matrix. Two opposite points on the sphere are orthogonal polarisations, the strongest case of what the logic calls opposition. The components with no counterpart yet are context, ground set and load.

What would test the theory: an experiment in which two beams with identical Stokes vectors, intensities and spectra behave differently when combined, and the difference follows a variable other than direction. No such result exists. In this page a ground set is a cap of directions around the beam’s own, and relations follow the logic’s rules: aligned when directions coincide, opposed when their inner product is negative, grounded when contexts match and the first beam’s direction lies in the second’s ground set.

Checked exactly

The impossible

A museum of things that look impossible and are not. Each exhibit poses a question. Think about it, then reveal what is going on.

Exhibit 1 · The impossible twin

Two experiments. Same light in, same light out. Are they the same experiment?

Exhibit 2 · The geometry that remembers

Move the light around a loop and bring it home. Did you return the system to where it started?

Scrub

Exhibit 3 · The butterfly effect of orientation

Nudge one corner of a loop by a fraction of a degree. How small a nudge moves the interference fringes by a thousandth of a fringe?

Nudge corner 3 by
Exhibit 4 · The sixteen-to-four mystery

Quester’s sixteen workload characters are sixteen different directions in four dimensions. Send them through the Hopf map. How many different points are left?

After the collapse, tap one of the four points to see which characters landed there.

Exhibit 5 · Doppelgängers

Two constructions. Are they equivalent, related by a transformation, or merely similar?

Exhibit 6 · The silent experiment

No words. Watch.

Checked on light Prediction from the geometry

The laboratory

Create experiments, hide them from a friend, reconstruct someone else’s, spend a measurement budget wisely, and break the assumptions to see what holds.

The stranger’s experiment

Build a hidden experiment and send it to someone

Choose up to four optical elements. The page turns them into a challenge link. Whoever opens it sees only what the elements do to three probe beams, never the elements themselves, and must rebuild an experiment that does the same.

hidden experiment’s outputs (rings)yours (dots)

The uncertainty auction

A three-element chain has been set up in one of its six possible orders. You have six measurement credits. Find the order.

OrderHow likely, given your measurements
Uncertainty radar

Each spoke is one order; the red shape reaches out by how likely it is. Gold lines join orders that every probe you have used so far cannot tell apart.

Chain: quarter-wave plate at 45°, half-wave plate at 0°, rotator by 30°. Each measurement sends a probe beam through and reads its Stokes vector with photon noise √((1 − s²)/N). Likelihoods are Gaussian under that model. Some orders act identically on a given probe, and no number of measurements with that probe alone can separate them.

The experiment’s fingerprint

Every experiment drawn as a glyph built only from its real data

Your chain from section 1
The same elements, reversed

Outer ring: each element in order, coloured by type (teal quarter-wave, blue half-wave, gold rotator), placed at its angle. Middle: where the H, D and R probes end up (seen from above the circular pole; dot size shows height). Centre: an arc whose length is the transformation’s rotation angle on the sphere. Two experiments that act identically on light have identical middles and centres.

Destroy the universe

A closed loop H → D → R with a reference beam. Remove things and watch what survives.

PropertyStill holds?Kind

The sound of a loop

Hear the hidden-phase loop from section 3

An artistic sonification, not sound the light makes. Pitch follows the solid angle, left–right position follows the phase, loudness follows the light that gets through.

Your date’s geometry

Turn any date into a loop on the sphere

An artistic encoding: the date seeds a generator that places the corners. The phase it then computes is real geometry.

Open questions

The unknown

Where the established part ends. These are open questions from the programme behind this page, stated as precisely as I can, with what would settle them.

Open challenge

Build two mixtures of light with identical Stokes vectors but different orientation tensors

Mixture 1
Mixture 2

The harder, open half of the challenge: propose a physical process whose outcome depends on the orientation tensor rather than the Stokes vector. No measurement on the light alone can do it, because both mixtures have the same coherence matrix. A proposal would have to involve something beyond the light, such as a record of how it was prepared.

Open questions

Proposed answers, counterexamples and computational tests are welcome at arcadescinza537@gmail.com. Only results that can be independently reproduced will be added here.

Checked exactly Prediction from the geometry Proposed by OCL

Beyond the visible

Machines that generate their own surprises. Every result shows its parameters and seed, so anyone can reproduce it. Each one is a computation in the geometry, reproducible from its seed, not a physical measurement.

The counterexample cannon

Pick a claim. The cannon searches for a configuration that breaks it.

The experiment autopsy

Three optical elements were used, in an order nobody wrote down. Here is what came out. Which histories could have produced it?

Evidence available

Possible historyAgrees with the evidence?
The phase wormhole

Two paths join the same two polarisations. Deform one into the other and watch their phase difference.

Path 1 runs from horizontal to diagonal through a fixed waypoint; path 2 through the one you set. Their phase difference is half the solid angle between them. In the plot, the solid line is that geometric quantity, which grows smoothly; the dots are the phase interference can see, which jumps by 360° whenever the geometric one passes ±180°. After a jump the fringes look exactly as they did before it.

The geometry courtroom

Five claims on trial. Read the evidence on each side, then see the verdict.

The mutation engine · the infinite experiment

Start from your chain in section 1. The engine breeds variations and sorts them by what survived.

acts on light exactly like the rootsame amount of rotation, seen from another framea different transformation
Selected experiment

Collisions in this family

Mutations: turn every axis by the same angle (a change of frame), mirror every angle, swap two neighbours, replace a half-wave plate by two quarter-wave plates at the same angle (or the reverse), or nudge one angle by 5°. A collision is two different descriptions in the family that act identically on every polarisation.

05 · Beyond existing geometry

Toward discovery

An expanding mathematical world built on my geometries: directional caps and their relations, nested and lifted structures, orientation tensors, and admissibility from OCL, TSAM and co-admissibility. Here you generate new constructions, evolve them, collide them and hunt for what stays unchanged. The question is no longer what this geometry represents, but what else it makes possible.

Four labels keep it honest: existing construction, proposed extension, computational hypothesis and verified on this page. A property that survives every test becomes a conjecture, not a theorem.

01 · The geometry frontier

Six research territories. Each opens into its own tools.

02 · The genesis engine

Generate a new construction from the primitives. The engine derives what it is.

Derived, not drawn

    Everything in the list is computed exactly from the definitions; nothing in it was programmed as a picture. A symmetry, an admissibility obstruction or a degeneracy appears only if the construction really has it.

    Reproducibility record
    
        
    03 · The evolution observatory

    Start from one of the original constructions and let it evolve. Each transformation opens a new branch.

    Each node shows how many of nine structural properties it still shares with the original; the darker the node, the more survived.

    Relationships between distant branches

    04 · The unknown invariants laboratory

    Propose a candidate invariant. The laboratory throws thousands of transformations at it and looks for a counterexample.

    The invariance map, recomputed on every visit

    Each cell attacks one quantity with 150 random transformations of one class, applied to three-cap configurations drawn from all five constructions, symmetric ones included. “Survives” means no counterexample was found: a conjecture to be proved. Note what the map shows: the inversive product and the relation pattern survive conformal boosts, while distances and areas do not.

    05 · The collision chamber

    Put two directional regions into the chamber and change how they meet.

    06 · The mathematical mutation challenge

    Find a transformation that keeps some properties and changes another.

    Start
    After your transformation
    PropertyGoalMet

    07 · The geometry-to-architecture bridge

    Arrange computational tasks by admissibility and measure the result against conventional placement.

    Each task needs a region of directions (its demand cap). Two tasks on the same unit interfere in proportion to the overlap of their regions. The admissibility-based arrangement places each task where it is most co-admissible with what is already there; round robin and random placement are the conventional baselines.

    Computational hypothesis · toy model

    08 · Discovery missions: original geometry challenges

    Five problems with a checker. A solution is something anyone can reproduce.

    There is no submission box on this page. To share a solution, send the method and the settings that reproduce it to arcadescinza537@gmail.com; it is checked by reproduction before it is called a result.

    09 · The geometry that hasn’t been named

    The page does not tell you what this structure is. Find out what it does.

    Investigate
    Discovery notebook

      Every entry records what was tested, how, and its status. Entries live in this browser tab only; the structure number reproduces the structure for anyone.

      10 · The public gallery

      Constructions, conjectures and solutions found by visitors

      Every entry is a reproducible record, not a picture: its settings and seed rebuild the result exactly. Entries are reviewed before they appear, and each is re-checked in your own browser as the gallery loads. A conjecture here has survived testing; it is not yet a theorem.

      Light as a testbed · the questions

      Polarised light is one place the geometry can be checked against measurement. Pick a claim to open its experiment.

      Light as a testbed · the experiment

      Mathematical model

      Competing hypotheses
      Experimental parameters

      Reproducibility record
      
          
      Light as a testbed · the next experiment

      Protocol
        Primary outcome

        Secondary outcomes

        Proposed experiment · not yet validated

        What would prove us wrong?

        Every proposition, the result that would refute it, and where it stands today

        PropositionIt fails ifWhere it stands

        Statuses marked “live” are recomputed from the numerical experiments on this page each time it loads. The counterexample cannon in Beyond the visible tries to break further claims.

        From mechanism to product

        How Faciens Technologies turns these mechanisms into products

        Every Faciens product is architected the same way. The five steps below are that pattern; the mechanisms on this page are its working parts.

        Choose a mechanism to see where it is built in

        Status labels state how far each product has got, in the same terms as the rest of the page. A product built on a mechanism inherits that mechanism’s open questions: when a question above is settled in the laboratory, every product in its column gains or loses with it.